STRAPACK iQ-400 Semi-Automatic Strapping Machine, with adjustable legs

Introducing iQ-400. Strapack’s new semi-automatic strapping machine with dual tension mode.

This allows for a wide variety of applications with just a flick of a switch.

• The iQ-400 is a durable and heavy-duty strapping machine designed to withstand various harsh environments.
• The iQ-400 is yet amazingly quite to operate and well suited for office use also.
• The iQ-400 has less moving parts, which makes is easy to maintain and keeps the operation cost low.
• All electric parts are arranged in one side of the machine, enclosed in the cabinet, for easy maintenance and protection of crucial parts.
• The iQ-400 runs strap from 5 to 15.5 millimeters without additional parts.
• The torque tension mode is suitable for stronger tension or to strap compressible packages, while the stroke tension mode is best for soft tension or quick operation.
• Tool-free access to frequently accessed areas for easy maintenance.
• Hinged tables are easy to remove for daily maintenance.
• Adjustable legs are available upon request. With this option, table height can be adjusted from 7775,5 up to 925,5 mm.
• To make the machine more robust, side and rear panels between the legs are available upon request.

Standard Specifications:

Dimensions:

• Width: 780 mm
• Height: 777 mm (incl. work guide)
• Depth: 540 mm

Weight: 46 kg

Table Height: 752 mm

Min. Package Size: W 100 mm x H 30 mm

Joint/ Strap / Coil: heat seal / polypropylene / ID 200 or 230mm x W 200mm

Strap Width / Thickness: 5, 6, 9, 12, 15,5mm / 0,45-07mm

Strap Tension: Max. 449N

Power Supply: 220-240V Single phase 50/60Hz 

Torque tension mode: electrically controlled:

Min. approx. 19,6N (1,9kgf) to max. approx. 449N (45,8kgf)

This mode is suitable when medium or stronger tension strength is required.

Stroke tension mode: mechanically controlled:

Min approx. 1mm stroke to max approx. 150mm stroke.

This mode is suitable when soft tension strength is required.

Switching between toque and stroke tension:

Switching the tension mode can be quickly done by following the instructions manual. When torque tension is applied, the „STROKE” bulb on the operation panel is off. When stroke tension is applied, the „STROKE” bulb will light up.