Kérdésed van? +36 1 204-4368
A Strapack iQ-400 félautomata pántológép, fix lábakkal, alkalmas különböző méretű termékek laza vagy feszes pántolására,
mint például, kisebb termékek összefogására, vagy dobozok megbízható tartós pántolására.
A Strapack iQ-400 típus hosszú élettartamát minőségi alapanyagainak köszönheti. A lekerekített sarkok kezelőbarát kivitelezést eredményez.
A gép műszaki paraméterei:
Introducing iQ-400. Strapack’s new semi-automatic strapping machine with dual tension mode.
This allows for a wide variety of applications with just a flick of a switch.
Standard Specifications
Dimensions
Width
780mm
30-11/16in.
Height
777mm (incl. work guide)
30-9/16in. (incl. work guide)
Depth
540mm
22-7/16 in.
Weight
46 kg
101bls.
Table Height
752mm
29-5/8in.
Min. Package Size
W 100mm x H 30mm
W 3-7/8in. x H 1-1/8in.
Joint/ Strap / Coil
heat seal / polypropylene
ID 200 or 230mm x W 200mm
ID 8 or 9in. x 8in.
Strap Width / Thickness
5, 6, 9, 12, 15,5mm / 0,45-07mm
1/4, 3/8, 1/2, 5/8in. / 0,017-0,027in.
Strap Tension
Max. 449N (45,8 kgf)
Max. 100,9lbf
Power Supply
220-240V Single phase 50/60Hz 0,40kVA
Improved tension specification
i-10
iQ-400
Tension mode
Torque tension
Torque or stroke tension
(manual switchover)
Max. tension strength
392N (40kgf)
449N (45,8kgf)
Reverse
speed
It varies according to the tension strength setting.
For example: it’s slower when applying softer tension.
It does not vary.
It’s faster than i-10 when applying weak to medium tension, and the same speed as i-10 when applying stronger tension.
Min. approx. 19,6N (1,9kgf) to max. approx. 449N (45,8kgf)
This mode is suitable when medium or stronger tension strength is required.
Min approx. 1mm stroke to max approx. 150mm stroke.
This mode is suitable when soft tension strength is required.
Switching the tension mode can be quickly done by following the instructions manual. When torque tension is applied, the „STROKE” bulb on the operation panel is off. When stroke tension is applied, the „STROKE” bulb will light up.
